Skip to content
BES Concrete Contracting Solutions
Commercial Concrete in San Diego County by BES Concrete
Poway · San Diego County

Commercial Concrete Contractors in Poway
& San Diego County

Parking lots, warehouse floors, loading docks, curb and gutter, ADA work, and tilt-up panels for GCs, property managers, and facility owners across San Diego County. CSLB #1026938.

★★★★★ 4.9 Google Rating✓ CSLB #1026938📅 Family-Run Since 2016💰 Free Written Quotes

Get a Free Commercial Quote

Tell us about your project. We respond same day, usually faster.

Licensed & InsuredCSLB #1026938
Since 2016Serving San Diego County
BBB Accredited#1087327
Quote Is the PriceNo change-order games
You Talk to the CrewRaymond answers directly
What We Do

Commercial Concrete We Self-Perform

From site flatwork to structural pours, BES handles commercial concrete across San Diego County with our own crew, coordinated with your GC and engineer.

Parking Lots & Site Flatwork

New pours, replacement, and expansion of commercial lots, drive aisles, and approaches built for truck and daily traffic.

Warehouse & Industrial Floors

Interior slabs on grade with rebar mats, hardeners, and flatness for racking, forklifts, and equipment.

Loading Docks & Ramps

Dock aprons, ramps, and heavy-load pads engineered for trailer traffic and repeated impact.

Curb, Gutter, ADA & Tilt-Up

Cast-in-place curb and gutter, ADA-compliant walks and ramps, and structural tilt-up wall panels.

How It Works

How We Run a Commercial Pour

The same disciplined process on every commercial pour, coordinated with your GC, engineer, and inspector.

Plans & Site Walk

We review your plans, confirm loads, and check the expansive clay soil and drainage before pricing.

Permits & Coordination

We pull City of Poway or County permits and coordinate dates with your GC, engineer, and inspector.

Sub-Base & Reinforcement

We compact base to 95% Proctor, set grade, and place rebar mats and dowels to the drawings.

Pour, Finish & Cure

Pump or direct placement, laser or wet screed, the specified finish, then saw-cut joints and cure per ACI.

Commercial Concrete project in San Diego County
Materials & Standards

How We Build Commercial Concrete That Lasts

San Diego County's expansive clay soil and seismic requirements make the base and reinforcement as important as the pour. Our commercial standards:

  • Concrete mix4,000 to 5,000 PSI structural mix for commercial loads; higher PSI with fiber for heavy forklift and truck areas.
  • Reinforcement#4 or #5 rebar mats sized to the loads, with dowels at construction joints. Wire mesh only where the spec allows.
  • BaseCompacted class II road base to 95% Proctor. San Diego County's expansive clay makes proper sub-grade prep essential.
  • JointsSaw-cut control joints on a planned layout, doweled construction joints, and joint filler on industrial floors.
  • CodeBuilt to the California Building Code, including Title 24 accessibility and seismic requirements for structural work.
Pricing & Concerns

Straight Answers on Cost and Scope

Ranges reflect typical San Diego County commercial work. Your firm number comes from a site walk and a set of plans.

What will this cost?

Reinforced commercial flatwork and lots run about $10 to $14 per square foot; industrial floors $13 to $18; tilt-up panels $14 to $32 per square foot of panel. These are San Diego County ranges. Slab thickness, PSI, reinforcement, and access drive the number. We price from your plans and a site walk.

How long does it take?

Commercial timelines depend on size and phasing. We can place large pours in a day, then concrete needs 7 days before traffic and 28 days for full strength. We give you a realistic sequence and dates with the quote.

Do you pull commercial permits?

Yes. As a CSLB-licensed contractor (#1026938) we pull permits through the City of Poway or the County of San Diego and coordinate the sub-grade, reinforcement, and pre-pour inspections.

Can you keep us open during work?

Usually. We phase the work so a lot stays partly open or a building keeps operating from another area, and we schedule around your hours to limit downtime.

Common Questions

Commercial Concrete FAQ

Do you do commercial and industrial concrete, not just residential?
Yes. Alongside residential driveways and patios, BES self-performs commercial and industrial concrete across San Diego County: parking lots, warehouse and industrial floors, loading docks, curb and gutter, ADA work, and tilt-up panels.
How much does commercial concrete cost in San Diego County?
Reinforced commercial flatwork and lots typically run $10 to $14 per square foot, heavy-duty industrial floors $13 to $18, and tilt-up wall panels roughly $14 to $32 per square foot of panel. We price from your plans and a site walk.
Are you licensed for commercial work?
Yes. BES holds CSLB license #1026938, is BBB accredited (#1087327), and is insured. We pull commercial permits through the City of Poway and the County of San Diego.
Do you work with general contractors?
Regularly. We work as the concrete sub for GCs on ground-up and tenant-improvement projects and directly for property managers and facility owners on repairs, replacements, and additions.
How does San Diego clay soil affect commercial slabs?
Expansive clay moves with moisture and can heave a slab if the sub-grade is not prepped right. We compact to 95% Proctor and import base rock where needed to build a stable platform under the slab.
Do commercial projects need permits?
Most do. New lots, structural slabs, retaining and tilt-up walls, and right-of-way work require permits and inspections, which we pull and schedule as part of the job.
Ready When You Are

Let's Look at Your Commercial Project

Free on-site quote, written before we start, honored when we finish. Licensed for commercial work in San Diego County.

Licensed & insured (CSLB #1026938) · BBB accredited #1087327 · Serving all of San Diego County from Poway

Ready to get started in Poway?

Free written quotes. Raymond picks up. No call centers, no subcontracted surprises.